Printronix ThermaLine Series Printer User Manual


 
4–73Commands
Example The following sample program specifies three logo calls placing the same
logo at three different locations. (The logo was previously defined and
stored.) The starting row and column specify the upper left corner of the
grid in which the logo was defined. To illustrate positioning, the starting
row and column are indicated on the example but do not necessarily reflect
actual location on the page.
LOGO
56;35;HAND
56;50;HAND
56;65;HAND
STOP
logocall.ex
SR 56
SC 35
SC 50 SC 65
When the logo to be executed is not found in memory, the default external
memory module is automatically searched. If the logo is found, it is loaded
into memory and execution resumes; otherwise, the “LOGO NOT FOUND”
error is printed.
NOTE: If an older application uses the disk parameter for the execute
command, it is ignored and the above steps are taken.