Filter
Top Products
Page BoundariesC–4
Setting Top/Bottom Margins
Using dot values to identify maximum vertical print positions, the page
boundary parameters of an 11–inch form has 792 dot rows at n/72–inch
vertically (72 dpi X 11 inches). (See Figure C–1.)
With no Top/Bottom Margin configuration setting on an 11–inch form, the
first print position is Starting Row 1, Starting Column 1 (A, Figure C–1).
However, if a Top/Bottom Margin value is set at 10, then Starting Row 1 is
adjusted down by 10 dot rows (B, Figure C–1), and the Ending Row is
adjusted up 10 dot rows (C, Figure C–1), thereby reducing the maximum
vertical printable area to 773 dots (793 – [10 + 10]). The greater the
top/bottom margin setting, the smaller the printable area on the form.
NOTE: The Top/Bottom margin setting on your Line-Matrix Printer
Emulation must match the IGP/PGL Top/Bottom margin
configuration setting.
Maximum Character Column
Maximum V
ertical Dot 793
Maximum Horizontal Dot 51
1
Maximum V
ertical
Print
Area (772 dots)
Maximum Character Row 67
A
B
C
Figure C–1. Top/Bottom Margin Example