Filter
Top Products
Commands4–52
FC The optional form count parameter specifies the
number of copies of the form to print. Enter the
appropriate number.
When the last page prints, the IGP/PGL returns to the
Normal mode automatically. Do not use the form count
parameter if dynamic data (AFn and BFn parameters),
incremental data (ICNT or IRST parameters), overlay
data, or EVFU data are used in the Execute command.
ICNTn The optional incremental form count. Enter ICNT and
the Incremental value as described in the Execute
Incremental Dynamic Data command described on
page 4–56.
IRSTn The optional incremental reset count parameter. Enter
IRST and the reset value as described in the Execute
Incremental Dynamic Data command described on
page 4–56.
AFn;(D)ASCII text(D)
The Execute Dynamic Alphanumeric Data command.
Enter the dynamic alphanumeric data during the
Execute Form mode as described in “Execute Form:
Dynamic Alphanumeric Data” on page 4–54.
BFn ;(D)data(D) The Execute Dynamic Bar Code Data command. Enter
the dynamic bar code data during the Execute Form
mode as described in “Execute Form: Dynamic Bar
Code Data” on page 4–55.
(cc)IAFn;[idir] STEPMASK;[RPTn;] [RSTn;] (D)STARTDATA(D)
The Execute Incremental Dynamic Alphanumeric Data
command. Supply the data as described on page 4–57.
(cc)IBFn; [idir] STEPMASK; [RPTn;] [RSTn;](D)STARTDATA(D)
The Execute Incremental Dynamic Bar Code Data
command. Supply the data as described on page 4–57.