Filter
Top Products
Bar Codes5–108
SR Defines the starting row for the bar code. Enter a value
ranging from row 1 to one less than the length of the
form. Character row or dot row is specified based on
the Scale command (page 4–88), or use the CP.DP
format (page 4–7).
SC Defines the starting column of the bar code. Enter a
value ranging from column 1 to one less than the width
of the form. Character column or dot column is
specified based on the Scale command (page 4–88), or
use the CP.DP format (page 4–7).
D The printable character (delimiter) identifying the start
and finish of the data field. Enter any printable
character other than a slash (/), the SFCC, or a
character used within the data. (It will not print with
the data.) Use the same character at both ends of the
data field.
data field Enter the characters for the bar code data, restricted to
exactly 11 digits. If the 2– or 5–digit add–on data
option is used, include this data at the end of the data
field. The first digit is interpreted as the number system
character. The remaining 10 digits are the data field
characters. The characters available for the data field
are 0 through 9 (30 through 39 hex, respectively).
PDF Optional parameter which affects printing of the
human readable data field. The data field will print
automatically unless the PDF–suppress command is
specified in the FONT parameter. OCR-B characters
can be printed above or below the bar code symbol.
This parameter is not allowed if a null data field is
specified. If the PDF command is not entered in the
UPC–A command format, the data field automatically
prints in OCR–B.