Filter
Top Products
2–5
Configuration
Select Font
This parameter allows you to select a font for the IGP/PGL feature. The
default is 0, which is U.S. ASCII. The following values are valid choices:
0 U.S. ASCII
1 German
2 Swedish
3 Danish
4 Norwegian
5 Finnish
6 English
7 Dutch
8 French
9 Spanish
10 Italian
Values 11–23 are undefined and will default to 0. You can set values 24–31
to specific fonts; refer to the USET command.
Auto Eject
If the last page of a job is not full, that is, the data does not fill the entire
page, you can instruct the printer to eject the page or to stop and hold the
page at the last print position.
Enable. The printer ejects the last page after the entire job has been
processed and printed.
Disable. The default. The printer does not eject the last page unless you send
a Page Eject command or until the printer receives another print job.
Select LPI
This is the number of lines to be printed per inch. For example, at 6 lpi there
is 1/6–inch from the top of one print line to the top of the next print line.
Default is 6 lpi.