Filter
Top Products
Bar Codes5–94
PDF417 Command Format
BARCODE
PDF417; [X[D]n;] [Y[D]n;] [(Hn)| (Wn);] [ASPECTh:w;] [(Rn)| (Cn);]
[Sn;][BFn;L;] [DARK;] SR; SC(T)
[(D)data field(D)(T)]
STOP (T)
BARCODE The Bar Code command; enter BARCODE.
PDF417 Designates bar code type PDF417; enter PDF417.
X[D]n Optional parameter to designate the width of the
narrow element in either the default 60 x 72 dots per
inch or, if the D is given, in target dots. (The target dot
is 300 dpi for the T3308, T3306 and T3304 printer
models and 203 dpi for the T3204 printer model.) The
default size is 1/60th of an inch.
Y[D]n Optional parameter to designate the height of the bar
code in either the default 60 X 72 dots per inch or, if
the D is given, in target dots. (The target dot is 300 dpi
for the T3308, T3306 and T3304 printer models and
203 dpi for the T3204 printer model.) The default size
is 2/72nd of an inch.
Hn Optional parameter to adjust the overall height of the
bar code symbol (including human readable data).
Height adjustments are made in 0.1–inch increments;
enter H and a value from 4 to 99 to select height
adjustments from 0.4 to 9.9 inches. Parameters Wn,
Rn, Cn or ASPECT can not be entered if this
parameter is used.
Wn Optional parameter for the maximum width of the
symbol based on the narrow element width. Enter Wn;
where n is the overall width in tenths of an inch.
Parameters Hn, Rn, Cn or ASPECT can not be entered
if this parameter is used.