Printronix ThermaLine Series Printer User Manual


 
Bar Codes5–2
Overview
A bar code is a graphic representation of alphanumeric characters. Bar codes
are produced by entering bar code commands in the Create Form Mode. The
IGP/PGL bar codes are listed below, in Table 5–1, with detailed bar code
information provided on the referenced pages.
All parameters must be separated by a semicolon (;) unless noted otherwise.
Throughout this chapter, actual commands required for input are shown
exactly as they must be entered, while all parameters associated with that
command are shown in italics. Optional parameters are enclosed in brackets.
Spaces are used only to visually separate the command parameters, but do
not enter these spaces in your command.
Table 5–1. Available Bar Codes
BAR CODE
MNEMONIC
SYMBOL
LENGTH
CODE SET PAGE NO.
Code 39 C39 Variable Alphanumeric (Page 5–21)
Code 93 CODE 93 Variable Alphanumeric (Page 5–28)
Code 128 –
Subset B
C128B Variable Alphanumeric (Page 5–35)
PDF417 PDF417 Variable Alphanumeric (Page 5–35)
Code 128 –
Subset C
C128C Variable Numeric (Page 5–35)
Codabar CODABAR Variable Alphanumeric (Page 5–35)
Code UCC– 128 UCC–128 19 or 20
digits
Numeric (Page 5–51)
EAN 8 EAN8 7 digits Numeric
(Page 5–57)
EAN13 EAN13 12 digits Numeric
(Page 5–64)
FIM FIM N/A A, B, C, or D (Page 5–71)
Interleaved 2/5 I–2/5 Variable Numeric (Page 5–78)
MSI MSI 13 or 14
digits
Variable
(Page 5–85)