Filter
Top Products
Chapter 5: Configuration
Manage Triggers
112 Psion Teklogix 7530 G2 Hand-Held Computer User Manual
Add Source
Only existing trigger sources are shown in the Source combo-box. To add a new
source to this list, tap on the Add Source button. A dialog box pops up, allowing
you to select the keyboard key to use as a trigger source.
Figure 5.13 Add Source Dialog
Trigger Type
You can enable either an Up/Down or Double Click response to a trigger press.
Normally, when a trigger (keyboard key, etc.) is pressed and released, a “trigger
down” event is sent to the “owner”—that is, the application receiving the trigger
press information—followed by a “trigger up”. If Double Click is chosen in this
menu, when the trigger is pressed, released, and then pressed again, a “double-click”
event will occur. If a mapping with the type Up/down has also been configured for
the same source, it will only receive the first set of trigger events.
Trigger Owner
This identifies the driver or application receiving the trigger presses.
Show All
By default, inactive owners are not shown. By checking this checkbox, all owners,
both active and inactive, are displayed.