Filter
Top Products
Chapter 3: Getting To Know Your 7530 G2
Adjusting The Beeper Volume
48 Psion Teklogix 7530 G2 Hand-Held Computer User Manual
3.5.3.1 Adjusting The Beeper Volume
On 63-key keyboards, the volume function keys are accessed by pressing [BLUE]
[F5] and [F6].
On 37-key keyboards, the volume function keys are accessed by pressing [BLUE]
[F3] and [F4].
To adjust the beeper volume:
• Lock the [BLUE] key ‘on’ and then, press the increase volume function key
or the decrease volume function key until the volume meets
your requirements.
• Remember to unlock the [BLUE] key when you’ve completed the volume
adjustment.
3.6 Internal Scanners
Important: For detailed scanner specifications and decode zone tables, refer
to “Internal Scanner Specifications” beginning on page 240.
7530 G2s support a wide range of scanner options to address a variety of user applica-
tion requirements. The scanner installed in your unit can be configured using the
Scanner Settings dialog box in the Control Panel (see page 143) and the Manage
Triggers application (see page page 109). External, non-decoded scanners are also
configured through the Control Panel.
However, external decoded scanners must be configured by scanning special configura-
tion bar codes. In these cases, the scanner manufacturer provides programming
manuals for configuration purposes.
• For Symbol decoded scanners, refer to the LS3408 programming guide.
• For PowerScan (PSC) decoded scanners, refer to the Powerscan Programing
Guide (PSC).
Scanner types include:
• Advanced Long Range: reads very large 1D bar codes (60 mil+) at very
long distances (up to 14m).
• Long Range: reads large 1D bar codes (55 mil) at long distances (up to 3m).
• High Performance: reads1D linear bar codes (5 - 55 mil) at medium dis-
tances (up to 1m).
• Extended Range: reads regular 1D bar codes (5 - 55mil) at short to medium
distances (1m), as well as large 1D bar codes (e.g. 55 mil) at long distances.