Filter
Top Products
Psion Teklogix 7530 G2 Hand-Held Computer User Manual 215
Chapter 6: Peripheral Devices & Accessories
External Bar Code Readers
6.1 External Bar Code Readers
6.1.1 PowerScan™ Standard, LR and XLR Bar Code Scanners
The 7530 G2 supports Psion Teklogix’ PowerScan™ industrial bar code scanner
with standard, long range and extra long range options.
To connect this scanner to the 7530 G2, attach the device to the tether port at the
upper-right side of the 7530 G2. Review your “PowerScan Programing Guide
(PSC)” before you begin.
6.1.2 Entering Data With The Bar Code Reader
Note: For helpful scanning tips, refer to “Scanning Techniques” on page 49.
When a label is scanned successfully, the 7530 G2 will beep if configured
appropriately and the scan LED will flash. Occasionally, the bar code labels are
poorly printed or damaged and cannot be read properly. In this case, use the
keyboard to enter data from the label.
6.2 RD7950 Integrated UHF RFID Reader
Note: This RFID reader is scheduled for future release.
The RD7950 UHF RFID Reader is an EPC-compliant RFID reader available for
Psion Teklogix rugged hand-held computing devices. Multimedia data capture
capabilities are delivered by combining RFID with existing technologies such as
laser bar code scanning or imaging.
6.3 Batteries
Note: Battery specifications are detailed beginning on page 247.
7530 G2s operate with Lithium-Ion batteries – either a 1900 mAh battery pack or a
high capacity, 2400 mAh battery.
Important: It is critical that the battery safety information described on
page XII near the beginning of this manual be reviewed carefully
and that all warnings be strictly followed.