Filter
Top Products
Chapter 3: Getting To Know Your 7530 G2
Radio Traffic LED
44 Psion Teklogix 7530 G2 Hand-Held Computer User Manual
Table 3.1 Charge LEDs
* If the charge fails, refer to the charger troubleshooting sections in ‘Chapter 6:
Peripheral Devices & Accessories’ beginning on page 213 for helpful details.
3.5.1.2 Radio Traffic LED
The upper-left LED on your unit flashes either yellow or green to indicate when the
radio transmits and receives data.
Note: Keep in mind that while the standard 802.11 radio supports the trans-
mit/receive LED, not all radios support this function.
Table 3.2 Transmit and Receive LEDs
3.5.1.3 Scan LED
Successful scans are indicated in two ways – with a scan LED and with an
audio tone.
Table 3.3 Scan LED
3.5.1.4 User Application LED
This indicator is available for user-loaded custom Windows CE applications. Your
supervisor can describe how this LED behaves with your application. Neither
Windows CE nor Open Tekterm V2.0 use this LED.
Charge in progress. LED displays solid yellow colour.
Cell temperature out of range for charge. LED flashes yellow.
Unable to charge battery. LED displays solid red colour.
Charge circuit failure.* LED flashes fast red.*
Function Radio Traffic LED Behaviour
Radio Transmit LED flashes yellow.
Radio Receive LED flashes green.
Function Scan LED Behaviour
Scan in progress LED displays solid red during scan.
Successful scan
LED displays solid green after decode.
Off when scan ended.
Unsuccessful scan LED flashes red.
Function Charge LED Behaviour