Filter
Top Products
Chapter 2: Basic Checkout
Changing Network Properties
26 Psion Teklogix 7530 G2 Hand-Held Computer User Manual
2.3.3.3 Changing Network Properties
To change the properties of an existing preferred network:
• Highlight the network that you want to modify.
• Tap on the Properties button.
• Make any necessary changes in the Wireless Properties dialog box, and
press [ENTER] to save the changes.
2.4 Checking The Scanner
Note: Details about operating and troubleshooting scanners, Imagers and
RFID readers are provided under the heading “Internal Scanners” on
page 48.
If your 7530 G2 is equipped with an internal scanner, you can test it to ensure that it is
operating properly. Point the scanner window at a bar code that your scanner was
designed to decode—for example, a 1D UPC bar code or 2D bar code. Press the
SCAN button or pistol trigger, and check for a valid decode on the hand-held’s screen.
Performance is improved if you disable all unneeded bar codes in the Bar Codes
screen. Review “Scanner Settings” on page 143 for details about
bar codes.
2.5 Using Microsoft ActiveSync
ActiveSync – Microsoft PC connectivity software – can be used to connect the
hand-held to PCs running this software.
Note: Keep in mind that you’ll need to run the USB Setup program to
configure your workstation before connecting the 7530 G2 via USB.
For information about the USB application, refer to Appendix C: USB
Setup Application.
By connecting the 7530 G2 to a PC with a cable and running ActiveSync on the PC,
you can:
• View 7530 G2 files from Windows Explorer.
• Drag and drop files between the 7530 G2 and the PC in the same way that
you would between PC drives.
• Back up 7530 G2 files to the PC, then restore them from the PC to the hand-
held again, if needed, and so on.
To install ActiveSync, follow the step-by-step instructions provided with the
program’s setup wizard. Refer to the following website for details:
http://www.microsoft.com/windowsmobile/resources/downloads/pocketpc/activesync35.mspx