Filter
Top Products
Psion Teklogix 7530 G2 Hand-Held Computer User Manual 149
Chapter 5: Configuration
Non-Decoded Scanners
Strip Trailing
The value entered in this parameter determines the number of characters that will be
removed from the end of the bar code before the suffix character is added.
5.11.2.3 Code 128
Enabled
Set this parameter to on to enable “Code 128” or off to disable it.
Include Sym
Setting “Include Sym” to on causes the group separator(s) and start code contained
in this type of bar code to be displayed on the screen.
Note: This option is available only when ‘EAN/UCC 128’ is selected.
Variations
When using Code 128, you can choose the bar code variation the scanner will
recognize. The options available are Standard, UCC 128 and EAN/UCC 128.
• Double-tap on Variations to display a dialog box listing your options.
• Tap on a variation to highlight it, and then tap on OK.
Standard
Enable Standard if “Code 128” is desired.
UCC 128
UCC 128 is a variation of “Code 128”.
EAN/UCC 128
To successfully scan this type of bar code, “EAN/UCC 128” must be enabled.
“EAN/UCC” bar codes include group separators and start codes.
Note: If you choose None, a check is not executed.
Field Size/Chars
Refer to the description beginning on page 148 for details.