Filter
Top Products
Psion Teklogix 7530 G2 Hand-Held Computer User Manual 145
Chapter 5: Configuration
Non-Decoded Scanners
Note: Your 7530 G2 is configured at the factory for internal scanner types. The
type of scanner installed can be determined through the System icon in
the Control Panel, under the System Properties tab.
Important: To improve the decode speed and performance, enable (set to
‘on’) only those codes that are required by the application.
Keep in mind that some bar code types are only available when an internal imaging
scanner is installed. All internal scanners can be configured using these dialog
boxes. External, non-decoded scanners are also configured through the Scanner
Properties dialog box.
However, external decoded scanners must be configured by scanning special
configuration bar codes. In these cases, the scanner manufacturer provides
programming manuals for configuration purposes.
• For Symbol decoded scanners, refer to the LS3408 programming guide.
• For PowerScan
®
(PSC) decoded scanners, refer to the Powerscan Program-
ing Guide (PSC).
5.11.2 Non-Decoded Scanners
• Tap on the Scanner dropdown menu, and choose Non-decoded.
All the available bar code symbologies for this type of scanner can be selected in
this tab.