Filter
Top Products
Chapter 3: Getting To Know Your 7530 G2
The Battery
32 Psion Teklogix 7530 G2 Hand-Held Computer User Manual
3.2 The Battery
The hand-held operates with a Lithium-Ion battery pack. Preparing the unit for
operation requires that a battery pack be charged and installed in the 7530 G2.
3.2.1 Battery Safety
Important: Before attempting to install, use or charge the battery pack, it is
critical
that you review and follow the important safety guidelines
in the section entitled “Lithium-Ion Battery Safety Precautions”
on page XII.
3.2.2 Removing And Installing The Battery Pack
Note: TURN OFF THE HAND-HELD BEFORE REMOVING THE BATTERY
PACK. If you do not turn the hand-held off before removing the battery, it
may be necessary to reboot the unit. Any active sessions may be lost.
Removing The Battery Pack
• If your unit is equipped with a handstrap, unhook it from the base of
the battery.
• Press down the release tab at the top of the battery, and slide the battery out.
Installing The Battery Pack
To install the battery pack:
• Slide the battery pack with the contoured plastic facing you into the
7530 G2. Click the battery into place.
• If your computer is equipped with a handstrap, insert the hook at the end of
the handstrap into the slot at the base of the battery.
3.2.3 Battery Chargers
Important: FOR DETAILED INFORMATION about chargers and docking
stations, refer to Chapter 6: Peripheral Devices & Accessories
beginning on page 213. For battery safety, refer to “Lithium-Ion
Battery Safety Precautions” on page XII.
All batteries must be charged before use. The battery can be charged with a variety
of chargers. These include: