Filter
Top Products
Psion Teklogix 7530 G2 Hand-Held Computer User Manual 15
Chapter 2: Basic Checkout
Attaching Carrying Accessories
2.1.5 Attaching Carrying Accessories
Psion Teklogix recommends that a carrying accessory – a handstrap, pistol grip or
shoulder strap – be installed on the 7530 G2 before use. If your hand-held is not
fitted with a handstrap or pistol grip, you can install either using the carrying
accessory kit supplied. You’ll need:
• A Phillips head screwdriver.
Important: Do not use adhesives such as Loctite to secure screws on carrying
accessories. These chemicals may damage the plastic casing.
2.1.5.1 Attaching The Handstrap
Two Phillips head screws are provided with the handstrap.
• Attach the strap to the two threaded inserts located at the back of the
7530 G2 near the top of the unit.
• Stretch the handstrap toward the base of the 7530 G2, and hook the bottom
of the handstrap into the slot near the base of the battery pack.