Filter
Top Products
Psion Teklogix 7530 G2 Hand-Held Computer User Manual 183
Chapter 5: Configuration
Decoded (Intermec ISCP)
Set Length L1, Set Length L2, And Set Length L3
Lengths for “Codabar” can be set from 0 to 255. The length of a code refers to the
number of characters (i.e., human readable characters), including check digit(s).
Double-tapping on these parameters displays dialog boxes where you can define the
code length that will be recognized by your scanner.
Length Mode
You can chose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.
Field Size/Chars
Refer to page 148 for details.
5.11.4.14 Matrix 2 of 5
Enabled
Set this parameter to ON to enable “Matrix 2 of 5”.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code
refers to the number of characters (i.e., human readable characters), including
check digit(s).
Field Size/Chars
Refer to page 148 for details.
5.11.4.15 MSI Plessey
Enabled
Set this parameter to on to enable “MSI Plessey”.
Enable Plessy
Set this parameter to on to enable the “Plessy” bar code.
Check Digit Verification
Uses the specified algorithm of the option you've chosen to ensure the integrity of
the symbol data before transmitting. If the data does not contain that algorithm, the
data is not transmitted. The available options are: MOD 10 Check, or Double MOD
10 Check.