Q-Logic 9000 Network Cables User Manual


 
3 – FVIC Configuration and Monitoring Features
Fibre Channel Configuration
3-28 D000003-006 Rev. A
Q
3. Click on FCP Target Device Statistics. The FCP Target Device Statistics
window is displayed:
Figure 3-48. FCP Target Device Statistics Window
The following is a description of each field of the FCP Target Device Statistics
window:
Name
Contains the name defined by the user in the Fibre Channel Target Device
Configuration Screen.
Connect Status
Indicates whether the FVIC port is logged into the specified target. May be
one of two states:
Up: Indicating that the device is connected.
Down: Indicating Attention/Error - that is, the device is a configured device
- but the FVIC card was unable to establish a connection to the device.
Port Number
Indicates the port numbers on the FVIC.
N Port ID
N Port ID is a 24-bit address that identifies the target. The Fabric Controller
dynamically assigns the N Port ID to the target. The N Port ID displayed
in this field is the target ID and designates the address of the target on the
SAN.
Node WWN
A unique 64-bit identifier that is assigned by the device vendor.
Port WWN
A unique 64-bit identifier that is assigned by the device vendor.
In Frame Size
Indicates the size of frames that is sent to the FVIC card from the SAN.
The size is reported in bytes. Valid values are: