Q-Logic 9000 Network Cables User Manual


 
4 – EVIC Configuration and Monitoring Features
Statistics
4-32 D000003-006 Rev. A
Q
To view EVIC port statistics:
1. From Menu, select Statistics.
2. Select Port Configuration/Statistics. The Port Statistics Window is displayed.
NOTE:At the user’s discretion, the Port State for each EVIC Ethernet port can
be enabled or disabled.
Figure 4-42. Port Statistics Overview
The following are high-level descriptions for the EVIC port and Ethernet Statistics
(EtherStats) displayed in the EVIC Port Configuration/Statistics Window.
State
Values are Enabled or Disabled.
Set Speed
The default value is full-10,000.
STP State
Indicates whether Spanning Tree Protocol (STP) is enabled or disabled.
Link
Indicates whether the link is up or down.
Actual Speed
Indicates the actual performance of the link as opposed to the set speed.
Type
Indicates the type of link layer connection.
RMON (etherStats)
Drop Events
The total number of events in which packets were dropped due to lack of
resources.
Octets