Filter
Top Products
3 – FVIC Configuration and Monitoring Features
Fibre Channel Configuration
3-18 D000003-006 Rev. A
Q
1. In the Discovered Hosts table, click the Click to Add Host button. The
following is displayed:
Figure 3-33. Add Host Window: Wildcarding
2. In the Initiator GUID text box, enter all zeros (16-digits) as shown in Figure
3-33.. An SRP port GUID of all zeros is considered a wildcard - it will match
any port GUID value.
3. In the SRP Extension ID text box, enter the 16-digit SRP Extension ID number.
In this example (as shown in Figure 3-33.) an SRP Extension ID of 14 is the
hexadecimal equivalent of an Initiator Extension of 20, which is found in the
ics_srp.cfg file.
NOTE:By default Initiator extensions are in decimal format in the host
ics_srp.cfg files (prefacing the decimal number with 0x will make it
hexadecimal), but must be entered as hexadecimal strings in the Add Host
window.
4. In the Name text box, enter an applicable host name.
5. Click Submit. The host will now appear in the Configured Initiators table.
NOTE:As shown in Figure 3-34., any SRP initiator that utilizes wildcarding will
appear in the Configured Initiators table as an asterisk (*) in the GUID column.
Figure 3-34. SRP Initiators: Wildcarding