Filter
Top Products
2 – Operations and Administration
Configuration and Monitoring Features
2-28 D000003-006 Rev. A
Q
This field determines whether or not the entry is saved for each reboot of the
switch.
❥ Nonvolatile means that the value is saved, and remains with each subsequent
reboot.
❥ Volatile or Other indicates it will not be saved.
❥ Status
Indicates the current status of the row. The row may be in one of three states:
❥ Active
❥ Not in service
❥ Not Ready
NOTE: A status of not in service indicates that the current row will not be used
in the event a trap is generated by the system. Toggling a trap to not in
service, which temporarily suspends trap forwarding, may be useful to
keep values intact.
SNMP Target Parameters:
NOTE: Changes can only be made to rows that have a status of not in service.
❥ Parameter Name
Specifies a mapping to an entry in the SNMP Target Parameters table,
determining the version of SNMP to use.
❥ MP Model
The Message Processing Model to be used when generating SNMP messages
for entry. Values for this field are 0 for SNMP v1, 1 for SNMP v2 and 3 for SNMP
v3.
❥ Security Model
The Security Model to be used when generating SNMP messages using this
entry. Values for this field are 1 for SNMP v1, 2 for SNMP v2, or 3 for SNMP v3
❥ Security Name
Security name identifies the entity for whom SNMP messages will be generated.
NOTE: This is equivalent to the community string in an SNMP get.
❥ Security Level
One of three options:
❥ NoAuthNoPriv: No Authentication, no privacy.
❥ AuthNoPriv: Authentication, no privacy.