3 – FVIC Configuration and Monitoring Features
D000003-006 Rev. A 3-9
Q
NOTE: By mousing over either radio button in the Boot Image Selection screen,
the user can glean additional information about each file, as shown in
Figure 3-15 below:
Figure 3-15. Boot Image File Pop Up
To choose a new boot image:
1. Click on a radio button of the new boot image.
2. Click Apply.
3.3
Fibre Channel Configuration
Figure 3-16. Fibre Channel Configuration Submenu
The Fibre Channel configuration submenu allows the user to perform the following
tasks:
❥ Fibre Channel Protocol (FCP) Interconnect Configuration.
❥ Discover and Configure FCP Target Devices.
❥ Discover and Configure SRP Initiators.
❥ Configure SRP Mapping (LUN Mapping).