2 – Operations and Administration
Configuration and Monitoring Features
2-52 D000003-006 Rev. A
Q
4. Click Apply.
NOTE:A reboot is required to activate the new gateway IP address.
2.2.13
Fabric Manager Configuration
NOTE: This section assumes the user has purchased and activated the
embedded version of the Fabric Manager
.
NOTE: For the SilverStorm 9020, the Fabric Manager Configuration submenu is
part of the EVIC and FVIC menu.
Figure 2-76. Subnet Manager Submenu
2.2.13.1
Automatically starting the Fabric Manager
To enable the Fabric Manager to automatically start at boot time:
1. From the menu, click Subnet Manager.
2. Click Configuration. The Subnet Manager Configuration window is displayed:
Subnet Manager Configuration Window
Figure 2-77. Subnet Manager Configuration Window
3. To configure the Fabric Manager to automatically start with each boot, click
Enabled.
NOTE: If the user wants to manually activate the Fabric Manager, click Disabled.
4. For MPFD 9080, 9120 and 9240 switches, in a redundant management
configuration, the Start On Slave option should be set to Disabled. In the event
that the Fabric Manager on the master spine is disabled, the Fabric Manager