Q-Logic 9000 Network Cables User Manual


 
2 – Operations and Administration
D000003-006 Rev. A 2-23
Q
1. From the menu, select Maintenance.
2. Click LDAP Configuration. The LDAP Authentication screen is displayed.
Figure 2-37. LDAP Authentication Screen
3. In the LDAP Server IP Address box, enter the address of the applicable LDAP
server.
4. In the LDAP Server Port box, enter the applicable server port number (the
default is 389).
5. When finished, click the Apply button.
2.2.5
HTTP/CLI Session Configuration
Figure 2-38. HTTP/CLI Session Config Button
The hyper text transfer protocol (HTTP) and command line interface (CLI) session
configuration feature allows the user to set HTTP and CLI session timeout
parameters, as well as set security requirements for the switch.
The session timeout duration is the length of time that a session remains active if
there is no GUI activity. If a session is inactive for a time exceeding the timeout
duration, the user will be logged out.
To modify the HTTP and CLI configurations: