Filter
Top Products
2 – Operations and Administration
Configuration and Monitoring Features
2-46 D000003-006 Rev. A
Q
1. Click on Port Stats.
2. Click on Set Field Thresholds. The Set Field Thresholds screen is displayed:
Figure 2-66. Set Field Thresholds Screen
3. To change a threshold value for any field:
a. Click in the Threshold field.
b. Enter a new threshold value.
NOTE: For those fields with a “Percent of Max” time unit, the user may
enter a number from 0 to 100. For those fields with a “1 Second”
time unit, the user may enter a number from 1 to 65,535.
c. Click Apply.
NOTE: If any threshold is exceeded on any port, the port will be displayed
as red on the switch map and a warning message will be logged.
The following are descriptions for each field in the Set Field Thresholds area:
NOTE: The thresholds for the following four fields are set as a percentage of
maximum; that is the percentage of maximum port capacity, which
depending upon IB fabric configuration can be:
❥ 4X (10/20Gbps)
❥ 1X (2.5 Gbps)