Filter
Top Products
2 – Operations and Administration
D000003-006 Rev. A 2-49
Q
1. Click the Use Network Time Protocol? checkbox.
2. Enter the IP address for the NTP server.
3. To save, click on Apply.
Figure 2-69. Time Service - NTP Setup
To manually set the system time:
1. Make sure the Use Network Time Protocol? checkbox is unchecked.
2. Set the current date and time using the drop-downs for Month, Day, and Year
as well as Hour, Minute, Seconds, and AM/PM.
3. To save, click on Apply.
Figure 2-70. Time Service - Manual Setup
To set time zone and daylight saving time (DST) settings:
1. In the Time Zone drop-down, select the correct time zone based upon
Greenwich Mean Time (GMT).
2. Using the Which, Day, and in Month drop-downs, set the start and end dates
for daylight saving time.