Q-Logic 9000 Network Cables User Manual


 
4 – EVIC Configuration and Monitoring Features
D000003-006 Rev. A 4-9
Q
NOTE: By mousing over either radio button in the Boot Image Selection screen,
the user can glean additional information about each file, as shown in
Figure 4-15 below:
Figure 4-15. Boot Image File Pop Up
To choose a new boot image:
1. Click on a radio button of the new boot image.
2. Click Submit.
4.3
Configuration
Figure 4-16. Configuration Menu
The Configuration submenu allows the user to perform the following tasks:
View Virtual NIC information.
Configure PAUSE.
Configure maximum transmission unit (MTU) size.
Configure VPort counts