Q-Logic 9000 Network Cables User Manual


 
2 – Operations and Administration
D000003-006 Rev. A 2-57
Q
NOTE: Use a value of 1 to access a remote host Fabric Manager or a remote
embedded Fabric Manager. There is no need to specify a value if
accessing a host Fabric Manager on the same host where
sm_query is running.
-d <VAL>: the destination IP address or host name. This is used to connect to
a remote instance.
Remote Options:
NOTE:These options are ignored if the -d option is not specified.
-h, -help: displays help information.
-c COMMUNITY: sets the community string.
2.3
Spine View Menu
For information on accessing the Spine View, refer to “Spine Module View” on
page 2-7.
Figure 2-78. Spine View Menu
NOTE: For information on IB port statistics refer to the section “Port Statistics”
on page 2-39.