Filter
Top Products
Hardware Checks
A-2 D000003-006 Rev. A
Q
A.1.3
Fan
A.1.4
OOB Ethernet RJ45 Port
A.1.5
Leaf Module IB Ports
Problem Fix
Red LED is lit Call Tech Support
Fan not running Ensure fan is seated properly.
If fan continues to be inoperable, call
Tech Support
Problem Fix
The RJ45 Ethernet Port(s) have a
RJ45 Cable with a Noise Problem:
This problem would occur if there is
a RJ45 cable that has poor
shielding or contact of pins.
Ensure that the cable is a
straight-through Cat 5 cable (not a
crossover cable).
If using a straight-through cable and still
experiencing this problem, test with a
known good cable.
Absence of Ethernet link and/or
intermittent Ethernet connectivity.
Ensure that the Ethernet cable is Cat
5E or Cat 6 certified.
Problem Fix
No LED Make sure the IB cable is properly
connected to both the leaf port and to
the destination device.
Make sure the other end of the
connection is plugged into a functioning
HCA or switch.
Make sure the cable does not exceed
maximum distances.
Bad IB Cable Test with a known good IB cable.