2 – Operations and Administration
Configuration and Monitoring Features
2-24 D000003-006 Rev. A
Q
1. From the menu, select Maintenance.
2. Click HTTP/CLI Session Config. The HTTP/CLI Session Configuration screen
is displayed.
Figure 2-39. HTTP/CLI Session Configuration Screen
3. To modify the session timeout duration (in seconds), click on the existing
configuration. The row changes to orange.
4. In the HTTP Timeout Duration field, enter the new timeout duration (in
seconds). The default is 0 seconds (i.e., no timeout).
5. In the CLI Timeout Duration field, enter the new timeout duration (in seconds).
The default is 600 seconds.
6. To change the User Authentication parameter, click on the dropdown list. The
following is displayed:
Figure 2-40. User Authentication Dropdown List
7. Select the preferred user authentication method. These are:
❥ LDAP - use an LDAP server. If the user name/password validation fails to
complete successfully, check in the database of the local switch.
❥ Login Enabled - UserName and Password must be entered, and must match
what is in the database of the local switch.
❥ UserOnly Required - According to the local switch database, a valid username
must be entered. A password is not required.
❥ Login Disabled - Does not require username or password.
8. When finished, click the Apply button.