When a Message Is Displayed
93
8
The destination list has been updated.
Specified destination(s) or sender's
name has been cleared.
A specified destination or sender's
name was cleared when the destina-
tion list in the delivery server was
updated. Specify the destination or
sender's name again.
The E-mail address entered is not cor-
rect. Please re-enter.
Make sure the e-mail address is cor-
rect, and then enter it again.
The entered path is not correct.
Please re-enter.
Confirm the destination computer
and the path, and then enter it again.
The specified group contains some
invalid destination(s). Do you want to
select only valid destination(s)?
The specified group contains some
destinations for sending by e-mail
and some destinations for sending
by Scan to Folder. To select destina-
tions for sending by email, press [Se-
lect] for the message displayed on
the e-mail screen. To select destina-
tion for sending by Scan to Folder,
press [Select] for the message dis-
played on the Scan to Folder screen.
Transmission has failed. Insufficient
memory in the destination hard disk.
To check the current status, press
[Scanned Files Status].
Transmission has failed. There was
not enough free space on the hard
disk of the SMTP server, FTP server,
or client computer at the destination.
Allocate sufficient space.
Updating the destination list...
Please wait. Specified destination(s)
or sender's name has been cleared.
If a destination or sender's name was
already selected, re-select it after this
message disappears.
Updating the destination list has
failed. Try again?
Check whether the server is connect-
ed.
You do not have the privileges to use
this function.
The machine has not been set to al-
low you to use the function. Consult
an administrator.
Message Causes and solutions