Filter
Top Products
Printing_ 4
1. To change the print settings from your software application, access
Printing Preferences (See "Opening printing preferences" on page 2)
2. Click the Basic tab, select Poster Printing in the Type drop-down list.
3. Select th
e page layout you want.
Specification of the page layout:
•Po
ster 2x2: Document will be enlarged and be divided into 4 pages.
•Po
ster 3x3: Document will be enlarged and be divided into 9 pages.
•Po
ster 4x4: Document will be enlarged and be divided into 16 pages.
4. Select the Po
ster Overlap value. Specify Poster Overlap in millimeters
or inches by selecting the radio button on the upper right of Basic tab to
make it easier to paste the sheets together.
5. Click the Paper tab, select the Size, Source and Type.
6. Click OK or Print
until you exit the Print window.
7. You
can complete the poster by pasting the sheets together.
Printing booklets
This feature prints your document on both sides of a paper and arranges the
pages so that the paper can be folded in half after printing to produce a
booklet.
If you want to make a booklet, you need to print on Letter, Legal, A4,
US Folio, or Oficio sized print media.
8
9
1. To change the print settings from your software application, access the
Printing Preferences (See "Opening printing preferences" on page 2).
2. Click the Basic tab, select Booklet Printing from the Type drop-down
list.
3. Click th
e Paper tab, select the Size, Source and Type.
The Booklet Printing option is not available for all paper sizes. In
order to find out the available paper size for this feature, select the
available paper size in the Size option on the Paper tab.
If you select an unavailable paper size, this option can be
automatical
ly canceled. Select only available paper. (paper without
or mark).
4. Click OK or Print
until you exit the Print window.
5. After printin
g, fold and staple the pages.
Printing on both sides of paper
You can print on both sides of a paper; duplex. Before printing, decide how
you want your document oriented. You can use this feature with Letter,
Legal, A4, US Folio, or Oficio sized paper.
We recommend not to print on both sides of the special media, such
as labels, envelopes, or thick paper to print on both sides of paper. It
may cause a paper jam or damage the machine.
1. To change the print settings from your software application, access
Printing Preferences (See "Opening printing preferences" on page 2).
2. Click the Basic tab.
3. Fro
m the Double-Sided Printing section, select the binding option you
want.
•Printer Default: If you select this option, this fea
ture is determined by
the setting you’ve made on the control panel of the machine.
•None
•Lo
ng Edge: This option is the conventional layout used in
bookbinding.
•Short Edge: This option is the conventional layout used in calendars.
•Reverse Double-Sided Printing: Check this option to reverse the
print order when duplex printing.
4. Click the Paper
tab, select the Size, Source and Type.
5. Click OK or Print until you exit th
e Print window.
Change percentage of your document
You can change the size of a document to appear larger or smaller on the
printed page by typing in a percentage you want.
1. To change the print settings from your software application, access
Printing Preferences (See "Opening printing preferences" on page 2).
2. Click the Paper tab.
3. En
ter the scaling rate in the Percentage input box.
You can also click the up/down arrows to select the scaling rate.
4. Select the Size, Source and
Type in Paper Options.
5. Click OK or Print until you exit th
e Print window.
Fitting your document to a selected paper size
This printer feature allows you to scale your print job to any selected paper
size regardless of the document size. This can be useful when you want to
check fine details on a small document.
A