Filter
Top Products
8
T
ROUBLESHOOTING
8.7
Fuser Area
If the paper jammed in the fuser area, “Paper Jam 1” appears
on the display:
N
OTE
:
The fuser area is hot. Take care when removing paper from
the machine.
1
Lift the release lever to open the side cover.
2
Pull down on the fuser lever as shown below.
This will release pressure on the paper.
If paper is not seen in this area, skip to the Exit Area.
N
OTE
:
Do not pull paper up through the fusing unit. Unfused
toner may adhere to the area, resulting in smudged copies.
3
Remove the jammed paper, in the direction shown.