Filter
Top Products
I
NSTALLING
S
OFTWARE
2.4
Installing Samsung Software
N
OTES
:
• For Windows 95/98/Me/NT 4.0/2000/XP users, cancel the “Found
New Hardware Wizard” screen when the computer boots up.
• Make sure that your machine is plugged in and connected to your
computer’s parallel port or USB port
before installing
software
from the CD. Windows 95 and Windows NT 4.0 do not
support USB connection.
1
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run and the opening
window appear.
If the installation window does not appear, click
Start
, and
then
Run
. Type
X:Setup.exe
, replacing “
X
” with the letter
of your drive, and click
OK
.
2
If the following window opens, connect your machine to the
computer and turn the printer on. Then click
Next
.
If the machine is already connected and turned on, this
screen does not appear. Skip to the next step.
N
OTE
:
If you click
Next
and the machine is not connected to the
machine, an alert message window appears. After connecting the
machine and turning it on, click
Yes
. Or, if you want to install the
software without the machine, Click
No
.