Filter
Top Products
Management tools_ 85
3. Click to open the TCP/IP configuration window.
4. Enter the network card’s MAC address, IP address, subnet mask,
default gateway, and then click Apply.
When you enter the MAC address, enter it without a colon(:).
5. The
machine prints the network information. Confirm all the settings
are correct.
6. Close the SetIP program.
Macintosh
SetIP program should be automatically installed during the printer driver
installation.
Printing out the machine’s MAC address
1. Press Menu on the control panel.
2. Pres
s the left/right arrow until Network appears and press OK.
3. Press the left/right arrow until Network Info. appears and press OK.
You can find your machine’s MAC address and IP address.
Setting network values
If you want to change your network printer IP setting, follow the below
instruction.
If you select Typical installation for a network printer during the
printer driver installation, the SetIP program automatically runs
after the installation. Go to step 4.
1. Prin
t the machine’s network configuration report to find your
machine’s MAC address.
2. Open the Library folder > Printers > Samsung > your printer
model name > SetIP.
3. Double click the SetIPApplet.html file.
4. The certificate window appears, click Trust.
5. Click to open the TCP/IP configuration window.
6. Enter the network card’s MAC address, IP address, subnet mask,
default gateway, and then click Apply.
When you enter the MAC address, enter it without a colon(:).
7. The
machine prints the network information. Confirm all the settings
are correct.
8. Close the SetIP program.
Linux
SetIP program should be automatically installed during the printer driver
installation.
Printing out the machine’s MAC address
1. Press Menu on the control panel.
2. Pres
s the left/right arrow until Network appears and press OK.
3. Press the left/right arrow until Network Info. appears and press OK.
You can find your machine’s MAC address and IP address.
Setting network values
1. Print the machine’s network configuration report to find your
machine’s MAC address.
2. Open the /opt/Samsung/mfp/share/utils/.
3. Double click the SetIPApplet.html file.
4. Click to open the TCP/IP configuration window.
5. Enter the network card’s MAC address, IP address, subnet mask,
default gateway, and then click Apply.
When you enter the MAC address, enter it without a colon(:).
6. The machine prints the network information. Confirm all the settings
are correct.
7. Close the SetIP program.
USING THE LINUX UNIFIED DRIVER
CONFIGURATOR
Unified Driver Configurator is a tool primarily intended for configuring
machine devices. You need to install Unified Linux Driver to use Unified
Driver Configurator (See "Installing the Unified Linux Driver" on page 32).
After the driver is installed on your Linux system, the Unified Driver
Configurator icon will automatically be created on your desktop.
Opening the Unified Driver Configurator
1. Double-click the Unified Driver Configurator on the desktop.
You can also click the Startup
Menu icon and select Samsung Unified
Driver > Unified Driver Configurator.
2. Click each button on the left to switch to the corresponding configuration
window.
To use the on screen help, click Help.
3. Af
ter changing the configurations, click Exit to close the Unified Driver
Configurator.
Printers configuration
Printers configuration has the two tabs: Printers and Classes.
1 Printers
Configuration
2 Scanners
Configuration
3 Ports
Configuration