Filter
Top Products
182 SANRAD V-Switch User Manual
device set
You need to define one parameter to change the V-Switch storage device
discovery mode:
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-rld
REPORT LUN
DISCOVERY
MODE FOR
DISCOVERING
DEVICE
LUNS
MANDATORY
YES OR NO
DEFAULT: YES
no
See “device set,” page 200, for the full list of switch parameters for the CLI
command device set.
Renaming a Storage Device
If you are working in
a V-Switch cluster,
the disk must be
renamed on both V-
Switches.
You can rename a disk. Renaming the disk will have no effect on the
volume hierarchies built on the disk.
storage set
You need to define three parameters to rename a disk:
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-s
STORAGE ALIAS STORAGE ALIAS TO
MODIFY
MANDATORY
Stor_1
-na
NEW ALIAS NEW ALIAS FOR
STORAGEK
MANDATORY IF
CHANGING
RAID1
-info
INFORMATION INFORMATION TO
ASSIGN TO
STORAGE DEVICE
MANDATORY IF
CHANGING
Expose_as
_transparent
Example:
The disk, Stor_1, is renamed to RAID1 and a note is made for the storage
manager to expose this disk as a transparent volume.
storage set –s Stor_1 –na RAID1 –info Expose_as
_transparent