Filter
Top Products
Sample Configurations 253
volume create mirror –vol Mirror1 –nbc 2 –ch Simple1 –ch
Simple2
Use the CLI command volume create mirror to create a mirrored
volume, Mirror2, from simple volumes Simple3 and Simple4.
volume create mirror –vol Mirror2 –nbc 2 –ch Simple3 –ch
Simple4
STEP 11. C
REATE STRIPED VOLUME (RAID 0)
Use the CLI command volume create striped to create a striped volume,
Stripe1.
volume create striped –vol Stripe1 –nbc 2 –sus 64 –ch
Mirror1 –ch Mirror2
STEP 12. C
REATE ISCSI TARGET AND LUN
After creating the final virtual volume configuration that you want to expose to the
network host, you need to create an iSCSI target for the volume as well as attach
LUN0 to the target volume. Use the CLI command
volume expose -new to
create the iSCSI target and attach LUN0 to the striped volume, Stripe1.
volume expose -new –vol Stripe1 –ta storage –tn
sanrad.billing. –device VSwitch
STEP 13. C
ONFIGURE HOST STATION INITIATOR
Open the Microsoft iSCSI initiator program on host station 1.