Filter
Top Products
Chapter 3: Installing the V-Switch 3000
41
Management Port Connection
The management port, labeled 10/100 mgmt, is located on the front center
of the V-Switch 3000. Use this 10/100 port to connect a host station either
directly or via a network to the V-Switch 3000. When connecting directly
to the V-Switch 3000 via 10/100, use a male-female straight cable. When
connecting via a network, use a standard network cable. For more
information on V-Switch 3000 management options, please refer to
“Introduction to Managing the V-Switch,” page 46.
10219
Management Port - RJ45
Figure 19. V-Switch 3000 Management Port
The management port has two LEDs:
act – indicates whether the port is connected and active: green –
active; blinking – port traffic
100 – indicates how the port is operational: on – 100; off – 10.
10076
act LED
100 LED
Figure 20. V-Switch 3000 Management Port LEDs