Filter
Top Products
Chapter 4: V-Switch Configuration 45
4
V-Switch Configuration
IN THIS
CHAPTER
INTRODUCTION TO
MANAGING THE V-
S
WITCH
CONFIGURING THE V-
S
WITCH 3000
M
ANAGEMENT
PARAMETERS VIA LCD
CONFIGURING THE
MANAGEMENT
CONSOLE
INITIALIZING THE V-
S
WITCH
CHANGING
MANAGEMENT
PARAMETERS
CONFIGURING THE
STORAGE PORTS
CONFIGURING THE
NETWORK PORTS
DISCOVERING ISCSI
T
ARGETS
CONFIGURING ISCSI
P
ORTALS
CONFIGURING IP
R
OUTING
After the V-Switch is connected properly to the physical disks,
management station and the network and powered up, the V-
Switch must be configured.
The basic V-Switch configurations define the management IP
configurations and can be done either via the LCD panel for the V-
Switch 3000 or the RS232 console port for both the V-Switch 3000
and the V-Switch 2000.
Once the management port is configured, any other V-Switch
configuration can be executed through the management port or
continued through the RS232 console port.
Disks and LUNs connected to the storage ports are discovered and
registered automatically.