Filter
Top Products
30 SANRAD V-Switch User Manual
Console Port Connection
The console port, labeled Console, is located on the front left of the V-
Switch 2000. Use this RS232 port and included male-female straight cable to
connect a console or dumb terminal to the V-Switch 2000 for initial system
configuration and local management.
10207
Console
Port
Figure 10. V-Switch 2000 Console Port
Powering Up
Do not power the V-
Switch 2000 up and
down quickly. The
power supply is
protected against
electrical surges and
needs at least 5
seconds between
power down and
power up.
You can power up the V-Switch 2000 once you have connected and
powered up the storage devices. The V-Switch 2000 contains a storage
auto-discovery function. At power-up the V-Switch 2000 automatically
scans for and registers all attached and powered up network storage
devices. Therefore, power up all storage devices before powering up the
V-Switch 2000. Storage devices added after V-Switch 2000 power-up will
be registered in the next V-Switch 2000 storage network scan.
The V-Switch 2000 contains one onboard auto-switch 100V/230V AC
power supply.