Filter
Top Products
Chapter 2: Installing the V-Switch 2000 31
10213
Power
Switch
Figure 11. V-Switch 2000 Power Supplies
Reconfirm that all storage devices are powered up. Plug the power cable
into the V-Switch 2000 power supply and then into the power source. Push
the power switch to the ON position. The V-Switch 2000 powers up.
The Power indicator LED on the front right of the V-Switch 2000
turns green.
Each network port 1 Gb indicator LED turns green only if
connected to the network and operating at 1 Gb.
Each storage port indicator LED on the front right of the V-Switch
2000 is green if connected to storage.@@ One color if connected and
another color if operating at the same speed.
The fans start operating.
You are now able to initialize the V-Switch 2000.