Filter
Top Products
208 SANRAD V-Switch User Manual
ip route remove
This command removes an IP route from a network port.
ip route remove
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-dip
DESTINATION IP IP OF HOST
STATION
MANDATORY
10.12.40.40
-dmask
DESTINATION
MASK
IP
MASK OF HOST
STATION
MANDATORY
255.255.255.0
-gw
GATEWAY GATEWAY TO HOST
STATION
IP
ADDRESS
MANDATORY
20.22.11.11
-if
INTERFACE
ALIAS
NETWORK PORT TO
OPEN
COMMUNICATION
THROUGH
MANDATORY
eth3
Example:
The routing path to destination network IP 10.12.40.40 (IP mask
255.255.255.0) is removed from network port Eth3.
ip route remove –dip 10.12.40.40 –dmask 255.255.255.0 -
dmask 20.22.11.11 –if eth3
ip isns show
This command shows all iSNS servers configured on the V-Switch.
ip isns show
Table 38: iSNS Servers
212.199.43.2
212.199.56.134
ip isns add
This command adds an iSNS server’s IP address to the V-Switch iSNS client.
ip isns add
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-ip
IP ADDRESS IP ADDRESS OF
ISNS SERVER
MANDATORY
212.199.43.1