SANRAD V-Switch Switch User Manual


  Open as PDF
of 300
 
Chapter 11: Command Line Interface 205
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-wcom
WRITE COMMUNITY COMMUNITY TO SET
INFORMATION
OPTIONAL
DEFAULT:
PRIVATE
-trap
TRAP TO SEND TRAPS TO
MANAGER
OPTIONAL
Y: SEND
N: DO NOT SEND
DEFAULT: Y
snmp manager set
This command modifies parameters of existing managers.
snmp manager set
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-ip
IP ADDRESS MANAGER IP
ADDRESS
MANDATORY
212.199.43.96
-p
UPD PORT PORT TO RECEIVE
TRAPS THROUGH
MANDATORY
150
-np
NEW PORT NEW PORT FOR
RECEIVING TRAPS
OPTIONAL
151
-rcom
READ COMMUNITY COMMUNITY TO
GET INFORMATION
OPTIONAL
DEFAULT:
PUBLIC
-wcom
WRITE COMMUNITY COMMUNITY TO SET
INFORMATION
OPTIONAL
DEFAULT:
PRIVATE
-trap
TRAP TO SEND TRAPS TO
MANAGER
OPTIONAL
Y: SEND
N: DO NOT SEND
DEFAULT: Y
snmp manager remove
This command removes a manager from the V Switch.
snmp manager remove
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-ip
IP ADDRESS MANAGER IP
ADDRESS
MANDATORY
212.199.43.96
-p
UPD PORT PORT TO RECEIVE
TRAPS THROUGH
MANDATORY
150
 previous next