Filter
Top Products
Chapter 4: V-Switch Configuration 53
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-loc
LOCATION LOCATION OF THE
CONTACT PERSON
OPTIONAL
ext4838
-rld
REPORT LUN
DISCOVERY
MODE FOR
DISCOVERING
DEVICE
LUNS
OPTIONAL
YES OR NO
DEFAULT: YES
no
-telnet
TELNET PORT PORT FOR V-
S
WITCH
COMMUNICATIONS
OPTIONAL
DEFAULT: 23
1597
-rcom
READ
COMMUNITY
COMMUNITY TO
GET INFORMATION
OPTIONAL
DEFAULT:
PUBLIC
-wcom
WRITE
COMMUNITY
COMMUNITY TO SET
INFORMATION
OPTIONAL
DEFAULT:
PRIVATE
Example:
The V-Switch alias is reset to V-Switch 1; the IP address for V-Switch
management functions is changed to 212.199.43.47. The date is set to the
21
st
of July, 2002 and the time to 1:30 p.m. Anna Levin is named as the
contact person and she can be reached at the internal office extension 4838.
device set –n VSwitch1 –ip 212.199.43.47 –d 21/07/2002 –
t 13:30 –c AnnaLevin –loc ext4838
You can now connect to the V-Switch 1 Gb Ethernet port or 10/100Mb
management port and begin managing the V-Switch operations and the
attached SAN.
Checking the V-Switch Configurations
After setting the general V-Switch Management configurations, you can use
the CLI command info to access the V-Switch Configuration table and
view the current configuration, including whom to contact in the event of
technical difficulties.
info
Table 11: V-Switch Configuration
Parameter Value
Name VSwitch1
Description SW Version 2.0, build 4,patch 0
Board version 1, PCB version 0
ID -1
Contact Anna Levin
Location Ext. 4838
Status OK