Filter
Top Products
I/O parameters
98
Analog outputs
The analog outputs can be controlled via the network. Simply write these parameters. The outputs to be controlled must not be assigned
to a drive function, otherwise the write operation has no effect.
Code Description
AI4C Parameter name: Physical image of analog input 4
Logic address: 5245 = 16#147D Type: INT
CANopen index: 2016/2E Read/write: R
INTERBUS index: 5FB9/39 Unit: 0.001 V or 0.001 mA
DeviceNet path: 7B/01/2E
The unit is:
•0.001 V if parameter [AI4 Type] (AI4t) is configured as [Voltage] (10U)
•0.001 mA if parameter [AI4 Type] (AI4t) is configured as [Current] (0A)
AI4r Parameter name: Standardized image of analog input 4
Logic address: 5235 = 16#1473 Type: INT
CANopen index: 2016/24 Read/write: R
INTERBUS index: 5FB9/35 Unit: 1
DeviceNet path: 7B/01/24
Code Description
AO1C Parameter name: Physical image of analog output 1
Logic address: 5271 = 16#1497 Type: INT
CANopen index: 2016/48 Read/write: R/W
INTERBUS index: 5FB9/40 (reading via PCP)
5FB6/50 (writing via PCP)
Unit: 0.001 mA or 0.001 V
DeviceNet path: 7B/01/48
The unit is:
•0.001 V if parameter [AO1 Type] (AO1t) is configured as [Voltage] (10U)
•0.001 mA if parameter [AO1 Type] (AO1t) is configured as [Current] (0A)
AO1r Parameter name: Standardized image of analog output 1
Logic address: 5261 = 16#148D Type: INT
CANopen index: 2016/3E Read/write: R/W
INTERBUS index: 5FB9/3D (reading via PCP)
5FB6/4F (writing via PCP)
Unit: 1
DeviceNet path: 7B/01/3E
AO2C Parameter name: Physical image of analog output 2
Logic address: 5272 = 16#1498 Type: INT
CANopen index: 2016/49 Read/write: R/W
INTERBUS index: 5FB9/41 (reading via PCP)
5FB6/52 (writing via PCP)
Unit: 0.001 mA or 0.001 V
DeviceNet path: 7B/01/49
The unit is:
•0.001 V if parameter [AO2 Type] (AO2t) is configured as [Voltage] (10U) or [Voltage +/-] (n10U)
•0.001 mA if parameter [AO2 Type] (AO2t) is configured as [Current] (0A)