Sun Microsystems V20z Server User Manual


 
4-40 Sun Fire V20z and Sun Fire V40z Servers—User Guide March 2005
FIGURE 4-27 Removing the Power-Supply Cage Assembly
4. To install the new power-supply cage assembly:
a. Insert the assembly into the chassis with the rear of the assembly angled
downward and the assembly handle in the fully open position.
b. Carefully insert the metal tabs on the rear of the assembly into their slots on
the chassis back panel.
c. With the tabs in place, set the front of the assembly down on the motherboard
connector.
d. Press the metal handle on the top of the assembly down until the connectors on
the motherboard engage with the assembly backplane.
5. Re-install the power supplies into the new power-supply cage assembly.
See “Replacing an Individual Power Supply” on page 4-37.
6. Before re-installing the cover on the server, check the routing of all cables for
obstructions.