Filter
Top Products
Chapter 1 Introduction to the Sun Fire™ V20z and Sun Fire V40z Servers
1-5
FIGURE 1-2
shows the back panel of the Sun Fire V20z server:
FIGURE 1-2
Back Panel of the Sun Fire V20z Server
Ethernet Port Labelling
It is important to note the labelling of the ethernet ports on the back panel of the Sun
Fire V20z server. As shown on the far right side of the server illustrated in
FIGURE 1-2
, interfaces
eth1
and
eth0
are labelled as “1” on the upper port and “0” on
the bottom port, respectively.
PCI Slot Labelling
The PCI slots are labelled on the server back panel as PCI O (next to the power
supply) and PCI 1 (between the SP and platform ethernet ports). See
FIGURE 1-2
.
■
The slot on the motherboard that corresponds to PCI 0 is identified by the
silkscreen label “Slot 2 133MHz”.
■
The slot on the motherboard that corresponds to PCI 1 is identified by the
silkscreen label “Slot 1 66MHz”.
AC power connector
AC power switch
AC power indicator LED
Keyboard Mouse
connector connector
Locate button
and LED
SP reset
button
Video
connector
USB
connector
Serial port
connector
SP 10/100
Ethernet
connectors
Platform Gigabit
Ethernet
connectors