C-4
Sun Fire V20z and Sun Fire V40z Servers—User Guide • March 2005
Following are the options on the
Main
menu.
TABLE C-4
Main Menu
Option Description
Adapter Indicates the specific family of LSI Logic Host Adapters.
PCI Bus Indicates the PCI Bus number (range 0x00 - 0xFF, 0-255
decimal) assigned by the system BIOS to an adapter.
Dev/Func Indicates the PCI Device/Function assigned by the system
BIOS to an adapter.
An 8-bit value mapped as follows:
Bit # 7 6 5 4 3 2 1 0
Bits 2-0: Function (range 0 - 7)
Bits 7-3: Device (range 0x00 - 0x1F, 0 - 31 decimal).
Port Number Indicates the I/O Port Number that communicates with an
adapter. The system BIOS assigns this number.
IRQ Indicates the Interrupt Request Line used by an adapter.
The system BIOS assigns this value.
NVM Indicates whether an adapter has non-volatile memory
(NVM) associated with it. An adapter's configuration is
stored in its associated NVM.
Boot Order Indicates the relative boot order (0 to 3) of an adapter. The
Fusion-MPT SCSI BIOS traverses up to four adapters in
the specified order in search of bootable media. Access the
“Boot Adapter List” Menu to modify this item.
LSI Logic Control Indicates whether an adapter is eligible for LSI Logic
software control or is reserved for control by non-LSI
Logic software.
RAID Status A status indicates the existence of a RAID array on an
adapter and what state its in. “--” indicates no RAID array
found on adapter.
Global Properties Indicates global properties that are not associated with a
specific adapter or device.