Appendix C SCSI BIOS Configuration Utility
C-3
C.2.1 User Input
Throughout the GUI, selections that are not permissible are grayed out.
Following are user input methods available from the GUI:
C.2.2 Main Menu
When you invoke the Fusion-MPT SCSI BIOS Configuration Utility, the main menu
displays a scrolling list of up to 256 LSI Logic PCI to SCSI host adapters in the
system and information about each of them.
Use the arrow keys to select an adapter, then press
Enter
to view and modify the
selected adapter’s properties (and to gain access to the attached devices). You can
only access adapters with LSI Logic Control enabled. After selecting an adapter and
pressing
Enter
, the adapter’s SCSI bus is scanned and the
Adapter Properties
screen
appears.
The main menu includes the following two selections:
■
Boot Adapter List
allows selection and ordering of boot adapters. Refer to “Boot
Adapter List” on page C-5.
■
Global Properties
allows changes to global scope settings. Refer to “Global
Properties” on page C-6.
To execute an item, select it and press
Enter
.
TABLE C-3
User Input Methods
User Input Description
F2 = Menu Sets cursor context to the menu selection area.
Select a menu item and press
Enter
.
Arrow Keys = Select Item
Home/End = Select Item
Up, down, left, right movement to position the
cursor.
+/- = Change [Item] Items with values in [ ] brackets are modifiable.
Numeric keypad plus symbol (+) and numeric
keypad minus symbol (-) update a modifiable
field to its next relative value.
Esc = Abort/Exit
Escape
aborts the current context operation
and/or exits the current screen. User
confirmation is solicited as required.
Enter = Execute <Item> Items with values in < > brackets are executable.
Press
Enter
to execute the field's associated
function.