Sun Microsystems V20z Server User Manual


 
Appendix C SCSI BIOS Configuration Utility C-5
C.2.3 Boot Adapter List
The adapter boot order specifies the order in which adapters will boot when more
than one operating-system adapter is in a system.
Up to four of the total adapters in a system may be selected as bootable. To add an
adapter to the boot list, press Insert while on the Boot Adapter List. This puts the
cursor on the adapter select list. Use the arrow keys to select the desired adapter and
press Enter to add it to the end of the Boot Adapter List.
To remove an adapter from the boot list, press Delete while the cursor is on the
desired adapter in the Boot Adapter List.
Following are the options on the List menu.
TABLE C-5 List Menu
Option Description
Adapter Indicates the specific family of LSI Logic Host Bus
Adapters.
PCI Bus Indicates the PCI Bus number (range 0x00 - 0xFF, 0-255
decimal) assigned by the system BIOS to an adapter.
Dev/Func Indicates the PCI Device/Function assigned by the System
BIOS to an adapter. An 8-bit value mapped as follows:
Bit # 7 6 5 4 3 2 1 0
Bits 2-0: Function (range 0 - 7)
Bits 7-3: Device (range 0x00 - 0x1F, 0 - 31 decimal).
Boot Order Specifies the relative boot order (0 to 3) of an adapter.
Minus symbol (–) decreases an adapter's relative boot
order. Plus symbol (+) increases an adapter’s relative boot
order.
Current Status Indicates whether an adapter in the boot list was enabled
during the most recent boot. Disabled adapters and their
attached devices are ignored by the Fusion-MPT PCI SCSI
BIOS although they are still visible to the Configuration
Utility.
Next Boot Specifies whether to enable an adapter upon the next boot.
The Fusion-MPT SCSI BIOS ignores disabled adapters and
their attached devices although they are still visible to the
Configuration Utility.